8FHW 8FHW 8FHW
LF Woofer 8"

8FHW

Code: DR-8-020-4R-B2-C0001

Woofer/8inch/Ferrite/Paper/200W/4ohm

Key Features

  • Heavy-duty rubber surround and paper cone
  • Ideal for small subwoofers, hi-fi applications
  • High power handling

Quick Specs

Impedance

4 Ω

Program Power

400 W

Sensitivity

84.40 dB

Fs

41.00 Hz

Magnet

Ferrite

Voice Coil

35.6 mm

Design Notes

The 8FHW is 8-inch low frequency woofer with linear frequency response characteristics, high power handling capability while generating low harmonic distortion artifacts.
The single roll rubber surround design allows the cone to travel in long linear motion. Together with lightweight, yet strong cone,this combination provides remarkable strength, high efficiency and a excursion linearity of 13mm (one direction).

Magnetic Circuit
REDCATT engineers have developed an efficient, ferrite based magnetic circuit, capable of delivering the high level of performance providing a consistent, high integrity magnetic flux gap, low distortion characteristic. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability.

Specifications

General Specs

Nominal Diameter 8"
Rated Impedance 4 Ohm
Magnet Ferrite
Basket Material Steel

Power Handling

AES Power 200 W
Continuous Power 400 W
Peak Power 800 W

Voice Coil

Diameter 35.6 mm
Winding Wire Copper
Former Aluminum
Winding Height 25.4 mm

T/S Parameters

Resonant Frequency (Fs) 41.00 Hz
Re 4.00 \u2126
Qes 0.750
Qms 4.20
Qts 0.600
Vas 19.60 liters
Sd 202.30 cm\u00B2
Mms 45.90 grams
Rms 2.81
Cms 0.3300
Bl 7.88 T\u00B7m
Le 0.720 mH
Sensitivity 84.40 dB

Design Details

Surround Material NBR
Cone/Dome Material Paper GF
Spider Conex
T-Plate 8 mm
Xmax (peak) 8.7 mm
Xmech 16.7 mm
Overall Diameter 214.00 mm
Bolt Circle Diameter 204.00 mm
Baffle Cutout Dia. 181.00 mm
Mounting Holes 8
Depth (flange to rear) 105.00 mm
Net Weight 2.10 kg

Ordering Codes

Product Code DR-8-020-4R-B2-C0001

Frequency Response & Impedance

Frequency response of 8FHW

2D Drawing

2D drawing of 8FHW

Technical Summary

The 8FHWX4-088 is an 8-inch ferrite woofer designed for hi-fi subwoofer and home audio applications requiring deep bass extension, high excursion linearity, and low harmonic distortion. It features a 1.4-inch copper voice coil on an aluminum former with 25.4 mm winding height, a lightweight paper cone with a long-excursion single-roll rubber surround, and a ferrite motor circuit optimized for minimum flux modulation and low distortion. With 8.7 mm of linear excursion (16.7 mm mechanical), 200 W AES / 400 W continuous power handling, and a 4-ohm nominal impedance, the driver provides substantial low-frequency displacement capability for its size class.

For applications requiring deeper anechoic extension, vented or passive radiator configurations in 8 to 11 liters tuned between 39 and 47 Hz extend the -3 dB point to approximately 33-43 Hz. Port lengths exceed 500 mm at these tuning frequencies, making folded slot ports or passive radiators the practical implementation choices. A passive radiator of similar Sd and excursion capability, tuned to 40-45 Hz, provides clean bass extension without port noise artifacts and is the recommended alternative to vented loading for compact hi-fi subwoofer enclosures.

This driver is particularly effective in compact sealed and passive-radiator hi-fi subwoofers, bookshelf-paired bass modules, and home theater systems where deep, controlled bass from a small enclosure is required. The flux-modulation-optimized ferrite motor, long-excursion rubber surround, and high mechanical clearance (16.7 mm) provide consistent, low-distortion performance across the driver's full excursion range.

Recommended enclosure volumes are simulated results. For best enclosure volumes and tuning, we recommend secondary simulation and careful evaluation. Several rounds of samples and fine-tuning may be required for optimal results.

Enclosure Recommendations

Recommended enclosure alignments (bass reflex):
- 8 liters tuned to 47 Hz: high output, strong mid-bass, reduced excursion; -3 dB approx. 43 Hz, HP filter 39 Hz
- 10 liters tuned to 43 Hz: balanced response, general-purpose (recommended); -3 dB approx. 40 Hz, HP filter 33 Hz
- 10 liters tuned to 39 Hz: extended low-frequency, requires HP filter protection; -3 dB approx. 33 Hz, HP filter 27 Hz

Frequently Asked Questions

  • - Heavy-duty rubber surround and paper cone
  • - Ideal for small subwoofers, hi-fi applications
  • - High power handling
Recommended enclosure alignments (bass reflex):
- 8 liters tuned to 47 Hz: high output, strong mid-bass, reduced excursion; -3 dB approx. 43 Hz, HP filter 39 Hz
- 10 liters tuned to 43 Hz: balanced response, general-purpose (recommended); -3 dB approx. 40 Hz, HP filter 33 Hz
- 10 liters tuned to 39 Hz: extended low-frequency, requires HP filter protection; -3 dB approx. 33 Hz, HP filter 27 Hz
Sealed or vented pa mid-woofer, 2-way compact top
AES Power: 200 W, Continuous: 400 W, Peak: 800 W. Sensitivity: 84.40 dB (1W/1m).

Related Products