6" | 6FHM
Ferrite Mid-Woofer
Key features:
- 3 layer cone, consisting hi-end 1k carbon fiber on nomex honeycomb core
- Fem optimized motor structure
- Low harmonic distortion
Design notes:
The 6FHM is a high efficiency, (89 dB 1watt / 1 meter) 6-inch mid-woofer with incredibly linear frequency response characteristics and ultra low harmonic distortion artifacts. The 6FHM uses a lightweight 1k carbon fiber material, assembled on both sides of Nomex honey-comb core. This unique cone provides the ideal weight to strength ratio. The rubber surround has been FEM modeled and optimized. The honeycomb cone with high-end 1k carbon fiber material provides remarkable strength, while pushing the cone break-up modes to high frequencies, significantly extending the working range of the speaker.The coneThe 6FHM cone is made using 1k carbon fiber honey-comb, placed from both sides of Nomex core, while the dustcap is made off hard-anodization reinforced aluminum. The dustcap shape and the hard anodizing are further improving the mid to high frequency behavior.
Specifications:
-
General specs |
Nominal Diameter: | 6 in. |
Rated Impedance: | 8 Ohm |
Power handling |
AES Power: | 40 Watts |
Program Power: | 80 Watts |
Voice Coil |
Diameter: | 1.3 in. |
Winding wire: | CCAW |
Former: | kapton |
Winding height: | 14.5 mm |
-
T/S Parameters |
Resonant frequency: | 36 Hz |
Re: | 6.9 ohm |
Qes: | 0.29 |
Qms: | 12.7 |
Qts: | 0.29 |
Vas: | 26.1 liters |
Sd: | 132.7 cm2 |
Mms: | 18.1 grams |
Bl: | 9.89 |
Le: | 0.26 mH |
Sensitivity: | 89.01 dB |
-
Design details |
Surround Material: | Rubber |
Cone material: | CF Honeycomb |
Spider: | Nomex |
Plate thickness: | 6 mm |
Peak to peak linear cone Displacement | 8.8 mm |
Overall diameter: | 181.5 mm |
Bolt circle diameter: | 169.5 mm |
Baffle cutout dia.: | 151 mm |
Number of mounting holes: | 6 |
Depth (flange to rear): | 81.7 mm |
Net weight: | 2.4 kg |
Ordering codes: |
8ohm version: | 6FHMX8-152C |
Frequency response & lmpedance
2D drawing