BACK TO TOP
APPLICATION:
• Ideal for two-way and multi-way (line arrays) enclosure designs. Also suitable for vented or double band-pass subwoofers.
10NPM
SPECS PDF
DRAWING PDF
<< BACK
NEODYMIUM MID-WOOFER
Ordering code: 10NPM-055
CONT. POWER
SENS.
Fs
Freq. Range
VC Dia.
IN-OUT WOUND
VC Wire
Cone /
Surround
Magnet
Type
825 WATTS
98.5 dB
60 Hz
50-
3,000 Hz
3"
IN-OUT
CCAW
PAPER w. CF
FABRIC
NEO
The 10NPM is a high efficiency, (98.5 dB 1watt / 1 meter) 10-inch mid bass woofer with incredibly linear frequency response characteristics, extreme high power handling capability while generating low harmonic distortion artifacts.-
The 10NPM uses a lightweight carbon fiber loaded cone assembly along with a precision double roll constant geometry surround. This combination provides remarkable strength, high efficiency and a excursion linearity of 7.5mm.
Magnetic Circuit
REDCATT engineers have developed a lightweight, inside-neodymium slug based magnetic circuit capable of delivering the highest level of performance providing a consistent, high integrity magnetic flux gap, ultra low distortion characteristic and high efficiency cooling system. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability.
GENERAL SPECIFICATIONS:
Nominal Diameter
250 mm (10 in.)
Rated Impedance
8 ohm
Power Handling
AES Power
550 watts
PROGRAM Power
825 watts
PEAK Power
1,650 watts
Power Compression
@ -10dB
0.7 dB
@ 0dB
1.5 dB
@ Max. Power
2.2 dB
Max. Recommended X-OVER Freq.
2,500 Hz
Recommended Enclosure Volume
4 - 30 Liters
Cone Design / Cone Material
Exp. Gmtry, REDCATT Pulp
Voice Coil Diameter / Winding
3"
Voice coil Winding Height
18.6 mm
Front Plate Thickness
10.5 mm
T/S Parameters:
Fs
60 Hz
Re
4.73 Ohm
Sd
320 cm2 (49.6 in.2)
Qms
8
Qes
0.29
Qts
0.28
Vas
29 Liters
Mms
49 g
Bl product (Force Factor)
16.7 Tm
Peak To Peak Displacement
6.5 mm
Le (mH @ 1kHz)
0.9
Mechanical Parameters:
Overall Diameter
261 mm (10.3 in.)
No. Of Mounting Holes
8
Bolt Circle Diameter
245 mm (9.6 in.)
Front Mount Baffle cutout
230 mm (8.8 in.) Nominal
Rear Mount Baffle cutout
232 mm (9.1 in.) Nominal
Total Depth
113 mm (4.4 in.)
Flange and gasket thickness
13 mm (0.5 in.)
Packaging info:
Net Weight
2.9 kg (6.4 lbs.)
Shipping Weight
3.5 kg (7.7 lbs.)
Packaging Dimensions
330x330x160mm (13x13x6.3 in.)